SSF6808D厂家类目 > 商铺首页 > 产品展示 > ssf6808d厂家_SSF6808D,苏州硅能,SSF6808D厂家
SSF6808D,苏州硅能,SSF6808D厂家

SSF6808D,苏州硅能,SSF6808D厂家

ssf6808d厂家

采购数量
1 件以上
价格
电议
运费: 江苏 苏州市 吴中区 | 买家支付运费
购买数量: 库存 1000件
在线询盘

提交询盘信息,一呼百应会为您匹配更多优质、合适的供应商!

*采购产品:

信息不能为空!请填写!

*采购量/单位:

采购量不能为空!

*期望价格:

价格不能为空!

*报价截止日期:

截止日期不能为空!

*联系人:

联系人不能为空!

*联系电话:

联系电话不能为空!

 

SSF6808D,苏州硅能,SSF6808D厂家
我想要了解:
请输入您要咨询的问题:
您的联系方式:

邮箱:

手机:

详细信息(SSF6808D,苏州硅能,SSF6808D厂家)
  • 加工定制:
  • 种类: 元素半导体

Features and Benefits: 

? Advanced trench MOSFET process technology

? Special designed for PWM, load switching and general purpse application

? Ultra low on-resistance with low gate charge

? Fast switching and reverse body recovery

? 175℃ operating temperature


Deion:


It utilizes the latest trench processing techniques to achieve the high cell density and reduces the on-resistance with high repetitive *alanche rating. These features combine to make this design an extremely efficient and reliable device for use in power switching application and a wide variety of other application

Notes:

①The maximum current rating is limited by bond-wires.

②Repetitive rating; pulse width limited by max. junction temperature.

③The power dissipation PD is based on max. junction temperature, using junction-to-cae thermal resistance.

④The value of RθJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C

⑤These curves are based on the junction-to-cae thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=175°C.

⑥ The maximum current rating is limited by bond-wires.



ATTENTION:

■  Any and all Silikron products described or contained herein do not h*e specification that can handle application that require extremely high levels of reliability, such as life-support systems, aircraft's conrol systems, or other application whose failure can be reasonably expected to result in serious physical and/or material damage.  Conult with your Silikron representative nearest you before using any Silikron products described or contained herein in such application.

■  Silikron assumes no responibility for equipment failures that result from using products at values that exceed,  even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specification of any and all Silikron products described or contained herein.

■   Specification of any and all Silikron products described or contained herein stipulate the performance, characteristics, and function of the described products in the independent state, and are not guarantees of the performance, characteristics, and function of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer  should always evaluate and test devices mounted in the customer’s products or equipment.

■   Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is pssible that these probabilistic failures could give rise  to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.

■   In the event that any or all Silikron products(including technical data, services) described or contained herein are conrolled under any of applicable local export conrol laws and regulation, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.

■   No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of Silikron Semiconductor CO.,LTD.

■   Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or  implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

■   Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product that you intend to use.

■   This catalog provides information as of Dec, 2008. Specification and information herein are subject to change without notice.



标签:     ssf6808d   ssf6808d厂家
企业诚信档案
苏州硅能半导体科技股份有限公司
8
VIP会员 营业执照 法人身份 手机认证 证书2张 商铺8年

注册资金:4450万元

联系人:夏经理

固话:0512-62560688

移动手机:13073303083

企业地址:江苏 吴中区

最新产品
ZN7002K,苏州硅能,ZN7002K供应图片

ZN7002K,苏州硅能,ZN7...

电议
SSF8205/苏州硅能/上海SSF8205图片

SSF8205/苏州硅能/上海S...

电议
ZN7002K,苏州硅能,上海ZN7002K图片

ZN7002K,苏州硅能,上海Z...

电议
SSF2318E,苏州硅能,SSF2318E价格图片

SSF2318E,苏州硅能,SS...

电议
SSF7509/苏州硅能/ssf7509图片

SSF7509/苏州硅能/ssf...

电议
友情链接
推荐采购信息
您好,欢迎来到一呼百应! 
登录 |免费注册
搜本站
苏州硅能半导体科技股份有限公司
8 |
一呼百应推广
扫码访问移动版商铺
产品分类
首 页 产品展示 铺主推荐 公司新闻 公司简介 联系我们

快捷导航

在线询盘
在线QQ
电话联系
夏经理 13073303083 固话:尚未完善
返回顶部