矿山用球齿 合金齿 精磨球齿、原生料合金球齿、耐磨矿用球齿、合金球齿供应商 矿山用球齿 合金球齿 精磨球齿

ISO

分类

分组

代号

ISO

Code

牌号

Grade

物理力学性能

Physical and

Mechanical

properties

推荐用途

Applications

recommended

密度

Density

G/cm

硬度

Hardness

HRA(HV)

抗弯强度

TRS

Mpa

YK06

YK06

14.9

90

2200

主要用于中等或小规格硬质合金球齿，镶制牙轮钻和冲击钻具，钻进软和中硬岩层。

It is mainly used for medium or small hard alloy ball teeth,insert the cone drilling and impact drill,and get into the soft and medium hardrock

JK05

JK05

14.8

89.5

2400

JK10

JK10

14.4

89

2200

可用于地质勘探钻具，煤田采掘用轻型电钻，作软岩层，煤层及无硅化岩层钻进钻具。

It can be used for geological exploration and drilling tools,and coal mining can be used as soft rock,coal seam and non-silicified rock drilling tools.

YG8C

YG8C

14.7

88.5

2500

YG9C

YG9C

14.5

87.5

2600

YG11C

YG11C

14.4

87

2600

适用于矿山采掘用钻具钎片，合金柱齿镶制牙轮钻等柱齿钻具，钻进中硬和硬岩层。

It is suitable for drilling tools,drilling tools,drilling tools and drilling tools.

YK20

YK20

14.4

86.5

2600

YK25

YK25

14.4

87

2600

YG13C

YG13C

14.2

86

2800

适用于硬质合金煤截齿，旋挖齿，掘进齿，钻进中硬岩层和硬岩层。

Suitable for hard alloy coal cutting teeth,turning teeth,tunneling,drilling in hard rock and hard rock.

适用于硬质合金煤截齿，旋挖齿，掘进齿，钻进中硬岩层和硬岩层。

Suitable for hard alloy coal cutting teeth,turning teeth,tunneling,drilling in hard rock and hard rock.

YK30

YK30

14.35

86.5

2800

YK40

YK40

14.35

86

2800

YG11CN

YG11CN

14.4

88

2500

具有较高的硬度和耐磨性，适用于铲雪片铲雪路面冰雪。

With high hardness and wear resistance,it is suitable for snow and snow shovel snow.

ZS10

ZS10

14.35

87

2800

强度高，韧性好，耐磨性稍差，适用于破碎直径小于50毫米坚硬的砂岩，石英岩，致密密硅化白云岩，硅化石英岩，铁矿石，闪长岩，花岗岩，砂岩，玄武石，鹅卵石等。

High strength,good toughness and wear resistance is a bit poor,is suitable for crushing a diameter of less than 50 mm hard sandstone,quartzite,tightly silicide dolomite,silicide quartzite,iron ore,diorite,granite,sandstone,basalt stones,pebbles,etc.

ZS20

ZS20

14.45

88

2600

硬度和耐磨一般，适用于破碎直径小于45毫米变质砂岩，花岗岩，花岗斑岩，普通石灰岩，露天矿花岗岩，白云岩，磁铁矿等。

The hardness and wear-reststing are generally applicable to the crushing diameter of less than 45 mm me*orphic sandstone,granite porphyry,granite,common limestone,granite porphyry,open-pit granite,dolomite,magnetite and so on

ZS30

ZS30

14.6

89

2500

硬度高，耐磨性好，适用于破碎直径小于40毫米中硬及坚硬的花岗岩，角闪岩，硅质板岩，含铜黄铁矿，大理岩，砂岩等。

High hardness,good abrasion resistance,suitable

For hard and hard granite with crushing diameter less than 40mm,hornite,siliceousSLATE,copper pyrite,marble,sandstone etc.